Air Compressor Requirements for Insertion Machines

Insertion machines rely on stable compressed air for their pneumatic components. Sizing the compressor correctly is essential:

1. Pressure requirement. Most insertion machines work at 0.6-0.8MPa. The compressor's maximum output should be slightly higher to cover losses in the air lines.

2. Flow requirement. Instantaneous peak flow occurs during component insertion cycles; the compressor plus buffer tank must cover peaks without pressure droop, or insertion accuracy will suffer.

3. Practical advice: choose an oil-free or well-filtered compressor, install an air dryer, and size the buffer tank generously. Dirty or wet air is the top cause of pneumatic component failure in insertion machines.

We specify the exact compressor requirement with every machine quotation — ask our engineers before purchasing yours.

Contact Fulxing Intelligent for a free consultation and quotation: Tel/WhatsApp +86 18565526634.