How Are Component Leads Processed After Automatic Insertion?

After inserting a component, lead processing is just as important as accurate placement: leads must be cut and bent to guarantee soldering quality and mechanical stability.

Take the Fulxing MINI automatic insertion machine: after insertion it automatically performs lead cutting and bending.

1. Lead cutting: the machine cuts leads to a preset length, adjustable between 1.2mm and 2.2mm, ensuring components sit firmly on the board while keeping enough lead for a strong solder joint.

2. Lead bending: bent leads lock the component in place before soldering — components will not fall out during wave soldering or handling.

The result: clean, uniform, solder-ready boards straight out of the machine, with no manual secondary processing.

Contact Fulxing Intelligent for a free consultation and quotation: Tel/WhatsApp +86 18565526634.